- Installation Technical Guide
- Cabin&door design
Section of steel structure
Features of steel structure well frame
High cost performance: in later period, skin plating gets harmonious design style with packaging (enclosure)by decoration unit. Installation position can be chosen by the user. It goes through painted anti-rusting treatment in the surface. It resists any corrosion too.
Aluminum alloy section
Features of aluminum alloy well frame
Independent frame glass design has no extra increase of the building cost with fine light transparency. It integrates with indoor decoration into one, Installation position can be chosen by the user. It resists any corrosion with long service lift. It chooses industrial-level aluminum alloy. lass applies safety laminated glass.
Multiple installation modes
- To suitable for your house structure door-opening requirements provide different elevator structure for your choice.
- VVVF drive technology: smooth and comfortable.
- Special-purpose traction machine frame: it is fixed in guide rail. Building does not bear any load.
- Host: it applies 220v-38-v single -phase power supply, ordinary home-use power. It needs no additional application of industrial power.
- Automatic door machine: Veriable frequency energy-saving, safe and reliable.
- UPS-emergency rescue device.
- One-key calling makes roll call to 3-5 main family member at emergency conditions.
- Total rated power 1.5KW in operation(inclufing 1.1KW drive system).Power is less than a micro-wave oven. It saves 80% power compared with small commercial elevator.
- Intellectual service: It links with owners mobile through network, it executes real-time monitor to elevator running conditions.
Strong drive type villa elevator
- High efficiency operation without counterweight.
- The motor is miniaturized and lightweight, which can adapt to the smallest well path. Meanwhile, the height of the top floor, the depth of the bottom pit and the utilization rate of the well path all achieve the best effect.
- Host noise control in about 48db, lower noise operation.
- The permanent magnet motor is equipped with control cabinet for core sealing. After mechanical or electric brake is released. The elevator will operate at a speed lower than 0.1 m/s, which is safe and reliable.
- No impact on the household power grid.
- The upper horizontal installation and the lower vertical installation meet different layout schemes.
S VVVF drive Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop
and gain the sound comfort.
S VVVF door operator Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start / stop. S Independent running The lift can not respond to outer calling, but only respond to the command inside the car through the action switch. S Automatic pass without stop When the car is crowded with the passengers or the load is closeto preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency. S Automatically adjust door
Door-open time can be automatically adjusted according to the difference between landing calling or car calling. S Reopen with hall call In the door shutting process, press reopen with hall call button can restart the door. S Express door closing When the lift stops and opens the door, press door-shut button, the door will be closed immediately. S Car stops and door open The lift decelerates and levels, the door only opens after the lift comes to a complete stop. S Command register cancel If you press the wrong floor command button in the car, twice continuous pressing of same button can cancel the registered command.
S Photocell protection In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects S Designated stop If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor. S Overload holding stop When the car is overload, the buzzer rings and stops the lift in the same floor. S Anti-stall timer protection The lift stops operation due to slippery traction wire rope. S Start protection control If the lift does not leave door zone within the designated time after it gets started, it will stop the operation. S Inspection operation When the lift enters into inspection operation, the car travels at inching running. S Fault self-diagnosis The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation. S Repeated door closing If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated. S Up/down over-run and
final limit Protection
The device can effectively prevent from the lift’s surging to the top or knocking the bottom when it is out of the control. It results in the more safe and reliable lift travel. S Down over-speed protection
When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety. S Upward over-speed protection
When the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift. S Micro-touch button for car call
and hall call
Novel micro-touch button is used for operation panel command button in the car and landing calling button.
S Floor and direction indicator
The car shows the lift floor location and current travel direction. S Floor and direction indicator The landing shows the lift floor location and current travel direction.
S Emergency car lighting Emergency car lighting automatically activated once power failure. S Emergency car lighting automatically activated once power failure. When the lift enters into emergency electric operation, the car travels at low speed inching running. S Five way intercom Communication amid car, car top, lift machine room, well pit and rescue duty room through walkie-talkie. S Bell In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell rings on top of the car. S Fire emergency return If you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift directly and immediately drives to the designated rescue landing and automatically opens the door.
S Car ventilation, light automatic
If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy. S Remote shut-off The lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service.
O Anti-nuisance In the light lift load, when three more commands appear, in order to avoid the unnecessary parking, all the registered callings in the car will be cancelled. O Open the door in advance When the lift decelerates and enters into door open zone, it automatically opens the door to enhance the travel efficiency. O Direct parking It completely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency. O Group control function When three or more same model lift groups are controlled in use, the lift group can automatically choose the most appropriate response. It avoids the repeated lift parking, reduces the passengers’ waiting time and increases the travel efficiency. O Duplex control Two sets of same model lifts can unanimously respond the calling signal through the computer dispatch. In this way, it reduces the passengers’ waiting time to the greatest extent and enhances the travel efficiency as well. O On-duty peak service Within the preset on-duty time, upward transport from the home landing is extremely busy. The lifts are continuously dispatched to the home landing in order to satisfy on-duty peak service. O Off-duty peak service Within the preset off-duty period, the lifts are continuously dispatched to top floor in order to satisfy off-duty peak service. O Door open time extending Press special button in the car, the lift door keeps open for certain period of time. O Car arrival gong Arrival tong in the car top announces that the passengers arrive.
O Voice announcer When the lift normally arrives, voice announcer informs the passengers about the relevant information. O Car assistant operation box It is used in the large loading weight lifts or the lifts with crowded passengers so that more and more passengers can use the car. O Operation box for the handicapped It is convenient for the wheelchair passengers and those who have vision problems. O Intelligent calling service The car command or hoist-way calling can be locked or connected through special Intelligent Input. O IC card control function All (partial) landings can only input car commands through IC Card after the authorization.
O Remote monitor The lift long-distance monitor and control can be fulfilled through modem and telephone. It is convenient for the factories and service units to timely know the travel conditions of every lift and promptly take the corresponding measures. O Remote control The lift can have independent travel according to the specific requirements through operation monitor screen (optional). O Camera function in the car The camera is installed in the car to monitor the car conditions.
O Leveling when power failure In normal power failure, the chargeable battery supplies the lift power. The lift drives to the nearest landing.